Hey, tell me how to connect the end, snap does not work? 
« on: June 18, 2010, 02:25:56 AM »
This forum is now archived!
- Welcome to the archive!
News:
The 3DRad community can be found at classdev.net.
- 3D Rad - Free 3D game maker - Forum >
- General Category >
- 3D Rad - Technical Discussion >
- road system
Author
Topic: road system (Read 1113 times)
« Reply #1 on: June 18, 2010, 04:02:59 AM »
If you made the track lower in one place, just use a ramp. 
jestermon
« Reply #2 on: June 18, 2010, 04:21:49 AM »
Hey....., Who's hey?
Politeness costs nothing.
Just drive the other way around the track then you won't fall off, and you get a free jump as well.
And if you ask nicely someone may even give you advice.
Politeness costs nothing.
Just drive the other way around the track then you won't fall off, and you get a free jump as well.
And if you ask nicely someone may even give you advice.
psikotropico
« Reply #3 on: June 18, 2010, 06:00:16 AM »
how the hell this will snap if the start/end pieces are in different levels? that is not a scalextric track, man...
« Reply #4 on: June 18, 2010, 06:04:53 AM »
Sorry Im from Russia I know English is not good, hey it was hi.
, I made the journey and how to finish it not know?
, I made the journey and how to finish it not know?
« Reply #5 on: June 18, 2010, 07:11:57 AM »
Changing the grade of the road in one place means you will have to change it someplace else to get it to match up. There is no trick to it. You will just have to play with it.
I would suggest starting with a flat track first, then adding your grade changes to that.
I would suggest starting with a flat track first, then adding your grade changes to that.
Pages: [1]